bmw tools page 2

BMW TOOLS PAGE 2

TOOLADDICTION

TOLL FREE 877-938-6657
Special tools for Mercedes and BMW Repair
We offer a wide variety of Automotive Special Tools for European Vehicles
Including VW Volkswagen - Audi Tools plus BMW, Mercedes and Volvo.
email Toolstore@aol.com

BMW3021

Bushing Master Kit

	Kit for easy On-The-Car R & R of Front control/track arm bushings. This Kit eliminates the need to disassemble the whole control-track arm from the car, in order to extract and then install a bushing with a hydraulic press, while the rest of the bushings on the arm are in good condition. This kit incorporates thrust bearings on every nut, ensuring longevity of the tool and will pay for itself. Applicable: BMW model 5 series ‘82 newer, 6 series, 7 series ‘88 newer, 8 series ‘91 and newer. Comes complete with instructions.

BMW3017	Cam Alignment Kit
	BMW 3017 - Exclusively designed to properly secure and align the cam Kit needed for setting cam shaft timing. Alignment Kit includes (2) blocks (1) swivel lock and (1) locator pin. Applicable: BMW M42, M50.

BMW3035

CAMSHAFT ALIGNMENT KIT

	BMW 3035 - Aligns and holds camshaft in place when assembling timing chain. Includes: Blocks and locking pin. Set of three tools for the alignment and securing of camshafts. Applicable: BMW Model M40, M43TU For V-12 engines you must have 2 blocks and the locking pin for this procedure.

BMW3013

VALVE ADJUSTING HOOK

	BMW 3013 -SPRING LOADED Valve Adjuster used for turning rocker eccentric in any position. Applications include: BMW engine - M10, M20, M30.

BMW3012

Double Ended Tappet Depressor

	BMW 3012 - Tappet Depressor used for preloading cam followers when exchanging valve adjusting shims. Applicable: BMW M engines Excluding European models.

9710

Top Dead Center Indicator

	9710 - Used for T.D.C. on any Gas engine. Simply unscrew a spark plug and twist the rubber hose part of this tool into the spark plug hole. As you rotate the engine with a turning bar, the piston forces air through the whistle part of this tool. Once the whistling stops the engine is at T.D.C.

BMW3022

Radio Removal Tool

	BMW 3022 - Five Sided Driver (Pentagon) Needed for R&R of BMW antitheft radios. Applicable: BMW models equipped with an antitheft radio mount.

10-218A

Valve Stem Seal Plier

	10-218A - Valve Stem Seal Plier used for the proper extraction of stem seals. The inside grooves on the tips of this Plier allows the firm grip of both O.E. and aftermarket seals Applicable: Most Overhead Cam engines.

10-208

Valve Shim Plier

	10-208 Shim Plier is used for proper R&R of valve adjusting shims. Applicable: Overhead Cam engines with adjusting shims.

1018

Pressure Adaptor

	1018 Pressure Adaptor needed for pressuring the master cylinder or clutch slave cylinder reservoirs. Used in conjunction with a pressure bleeder. Comes with a 1/4-18 NPT threaded opening. Applicable: Most European models.

4491b

OXYGEN SENSOR SOCKET

	4491B Special 22mm Crowsfoot Socket with 3/8 Drive Used for the removal and replacement of Oxygen Sensor that are situated within a confined area. No need to snip the wires leading to the unit when all you want to do is check the sensor. Applicable: Most European Models.

BMW3004

Clutch Wear Gauge

	BMW 3004 Clutch Wear Gauge used for checking thickness of clutch disk without removing the transmission. Applicable: BMW models ‘75 and newer.

1088

Pilot Bearing Puller

	12- 15mm Universal Pilot Bearing and Blind Hole bushing Puller. Important: Removing the center bolt of this puller will allow you to penetrate an I.D. as small as 12mm. Do not use on an I.D. larger than 15mm Applicable: Most BMW and Asian and compact domestic. Excluding Suzuki and Geo

BMW3036

Special Pin Wrench

	BMW 3036 - This new hand held pin wrench was designed to remove and install the plastic shift coupler ring - nut, during R&R of of manual shift lever. Made from Steel. Applicable: All BMW models ‘86 and newer.

BMW3025

30mm Thin Wall Deep Socket

	Transmission Tool BMW 3025 Thin Wall Deep Socket Specially designed 30mm thin walled 12 point, deep socket needed for the proper R&R BMW; transmission drive shaft flange nut and pinion drive shaft flange nut of differential.

BMW3005

Allen Holding Wrench

	BMW 3005 Wrench comes with a 10mm Allen insert, and is used for the R&R of BMW Differential Oil Plugs Applicable: All late model BMW's.

242 Master Kit

GEARBOX BEARING EXTRACTOR

	THE "EAGLE CLAW" OF BEARING EXTRACTORS THE EXTENSION TUBE AVAILABLE ALLOWS EXTRA REACH OVER LONG SHAFTS THE ONLY SOLUTION WHEN NO OTHER EXTRACTOR CAN GRAB HOLD OF THE BEARING SURFACE THE 242 MASTER KIT IS COMPRISED OF OVER 13 COMPONENTS

1017

Heavy Duty Allen

1017 Heavy Duty Allen
17mm Stubby Socket
Heavy duty Allen socket designed specially for R&R of gearbox drain plugs.
For a variety of applications.

BMW3026

Bushing Master Kit

	BMW 3026 - For the proper R&R of metal-clad rubber mount bushings of rear axle carrier sub-frame. This special service tool has been “Field Tested” and redesigned. Incorporating a thrust bearing to ease the pulling -pushing action, Reduces the wear and tear of the tool. This Kit comes complete with all the components to get the job done right. Applicable: Chassis - E23, E24, E28, E30, E32, E34, E36. On the car application! Comes with instructions.

BMW 3027

Rear A-Arm Metal Clad Bushing Kit

	BMW 3027 - This kit is used for the efficient R & R of Rear A-Arm Metal Clad Support Bushings. Applicable:1982 & newer. Designed to work in conjunction with a C-Clamp.

B 90 BMW KIT

b90-bmw

	b90-bmw Designed to easily remove and install the wheel bearing and hub of spindle assemblies. Applicable: Most every 3, 5, 6, 7 and 8 series models from the early '80 to present with S.R.W.B and I.R.S., including A.W.D. This is the best value for R and R of the Rear Wheel Hub & Bearing of German vehicles, as well as Front Wheel Hub & Bearing. Asian, Domestic and German vehicles. Sub kits are available also.

BMW3039

Eccentric Adjuster

	BMW 3039 -Tool is used for Adjusting toe-in of rear wheels. 1/2" drive. Applicable: Chassis - E36.

BMW3003

Press Arbor Kit

	BMW 3003 - Control Arm Press Arbor Kit This set is used for the R & R of control/track arm bushings. Used in conjunction with a hydraulic press. Applicable: BMW cassis E24 and E28.

BMW3038

PRESS ARBOR KIT

	BMW 3038 - BMW E36 PRESS ARBOR KIT CONTROL ARM/BALL JOINT TOOLS For removing and installing the outer wheel control arm ball joint. Use it together with C-Clamp (TW 35504 or OTC 7249) on the car, or with your hydraulic press. Applicable: E36 models. (Ball Joint # 31126758510)

BMW3028

INNER BALL JOINT REPAIR KIT

	BMW 3028 - INNER BALL JOINT REPAIR Set used for proper removal and installation of inner ball joint of control arm. For on the car repair, requires this set to be used in conjunction with a C- Clamp. Or to be used in conjunction with Hydraulic Press Applicable Chassis: E30 and E36.

P243

8mm Extra Long Allen Socket

	P 243 - Super Duty 8mm Allen Extra Long 3/8 Drive Socket This 8mm Extra Long Allen is a solid one piece construction. Overall length is 7.75 inches. For R & R CV Joint Bolts. Allows easy access w/o damage to rubber boot on drive hub of gearbox. Used on Most BMW

BMW3029

Heavy Duty Separator

	BMW 3029 - Heavy Duty Separator Needed for the proper disassembly of ball joints of drag links and tie rods. Applicable: Most BMW models. BASE OF OPENING=21.5mm

BMW3030

Heavy Duty Extractor

	BMW 3030 - Heavy Duty Extractor Needed for the proper disassembly of ball joint from lower wishbone. Applicable: Most BMW models. BASE OF OPENING=25.5mm

BMW3014

Pin Wrench Socket

	BMW 3014 - Pin Wrench Socket with 1/2” drive Used for R&R of threaded ring retaining nut of strut tower on front shock absorber. Applicable: BMW chassis E3, E9, E21, E23, E24, E28, E30, E32, E34

266H

Separator

	266h - Separator used for disassembly of Pitman arm type tie rod ends without tearing the boots. Opening size is 18mm. Most VW - Audi - Late Porsche models.

BMW3000

Arbor Oil Seal Installer

	BMW 3000 - Arbor needed for the proper installation of oil seal on differential output shaft Chassis: E23, E24, E28, E30, E32, AND E34.